published date : feb 26 , 2008 drawing no : sdsa6329 v1 checked : b.l.liu p.1/4 part number: ZM2BB79W 3.8x2.0mm dome lens smd chip led lamp www.sunled.com part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. ZM2BB79W blue ingan water clear 480 1095 458 60(h) 35(v) preliminary spec features z 3.8mmx2.0mm smt led,3.2mm thickness. z low power consumption. z ideal for back light and indicator. z various colors and lens types available. z package : 500pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0. 008") unless otherwise noted. 3.specifications are subject to change without notice. attention observe precautions for handling electrostatic discharge sensitive devices m2bb (ingan) unit forward voltage (typ.) (i f =20ma) v f 3.2 v forward voltage (max.) (i f =20ma) v f 3.7 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 458 nm wavelength of dominant emission (typ.) (i f =20ma) d 465 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 22 nm capacitance (typ.) (v f =0v, f=1mhz) c 110 pf operating characteristics (t a =25c ) absolute maximum ratings (t a =25c ) m2bb (ingan) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 100 ma power dissipation p t 111 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 electrostatic discharge threshold (hbm) 1000 v
published date : feb 26 , 2008 drawing no : sdsa6329 v1 checked : b.l.liu p.2/4 part number: ZM2BB79W 3.8x2.0mm dome lens smd chip led lamp www.sunled.com ? m2bb
published date : feb 26 , 2008 drawing no : sdsa6329 v1 checked : b.l.liu p.3/4 part number: ZM2BB79W 3.8x2.0mm dome lens smd chip led lamp www.sunled.com ? tape specification (units : mm) ? recommended soldering pattern (units: mm ; tolerance: 0.1) remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity/ luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters. the device has a single mounting surface. the device must be mounted according to the specifications.
published date : feb 26 , 2008 drawing no : sdsa6329 v1 checked : b.l.liu p.4/4 part number: ZM2BB79W 3.8x2.0mm dome lens smd chip led lamp www.sunled.com packing & label specifications ZM2BB79W
|